SEM High Build Primer Surfacer-Aerosol

High Build Primer Surfacer-SEM-Aerosol-20oz

DESCRIPTION

High-Build Primer Surfacer is an elastomeric acrylic coating for priming metal, aluminum, urethane, fiberglass and plastics.

FEATURES

• Provides superior adhesion
• Excellent filling properties
• Works on flexible or rigid substrates
• Easy to sand
• Topcoat with most refinish material

SUITABLE SUBSTRATES

• Steel
• Aluminum
• Plastic
• SMC
• Fiberglass

HANDLING AND APPLICATION

PREPARATION:

PLASTIC:

Clean surface thoroughly with Scuff & Clean and rinse with water. Next, clean with Plastic & Leather Prep. Sand surface with 180-320 grit sandpaper and clean again with Plastic & Leather Prep or. Repeat cleaning until water no longer beads on surface. Apply XXX Adhesion Promoter to olefin-based plastics.

METAL AND ALUMINUM:

Clean surface thoroughly with SEM Solve. Apply per directions. Sand surface with 180-320 grit sandpaper and clean again with SEM Solve.

SMC AND FIBERGLASS:

Clean with SEM Solve paying close attention to not saturate any exposed fibers. Sand surface with 180-320 grit sandpaper and clean again with SEM Solve.

APPLICATION:

Coats:

2-3 medium wet coats

Dry time: 1 hour

Flash time: 5-10 minutes between coats

Sand: 320-400 grit sandpaper

Note:

If clogging develops, remove spray button with a twisting motion and clean with XXX Gun Cleaner or material compliant with VOC regulations in your area. Do not stick pin or other object into can. Gently replace spray button

with top of can and spray button pointed away from you. After each use, turn can upside down and spray several seconds to clear spray tip.

STORAGE: High-Build Primer Surfacer should be stored in a cool dry place with adequate ventilation away from heat, sparks and flames. The shelf life for High-Build Primer Surfacer is 2 years